Copyright © 2002
MTAB ENGINEERS PRIVATE LIMITED All rights reserved.
Names, trademarks and copyrights are the property of MTAB ENGINEERS PVT. LTD., MTAB reserves the right to alter machine designs & specifications without prior notice. |
Website Developed & Maintained by Doublefocus |
| MTAB |  |
Products | |
Mechatronics | |
Microprocessor Trainer Kits | |
MTAB 80 |
MTAB 80
| Specification | ||
| CPU | : | Z 80 operates at 1.78 MHz |
| MEMORY | : | Provision for 64K Bytes in combination if ROM/RAM |
| 16K Bytes of Monitor Program (27128) and 32KB | ||
| ytes of RAM (62256) are supplied. Remaining 16KB | ||
| Bytes of memory (ROM/RAM) area is for user expansion. | ||
| RAM MEMORY | : | Four 28-pin sockets to give 128K bytes using |
| 4x62256. 64K bytes supplied using | ||
| 2x62256. Resets is for user expansion. | ||
| BUS | : | Buffered TTL compatible bus signals brought out to 50-pin ribbon |
| cable connector for easy expansion. | ||
| INTERFACE | : | Calculator type keypad, Elevator, 7 Segment Display, ADC using DAC, |
| MODULES | Dual Slope ADC. Dual DAC, Logic Controller, Crystal clock Divider, | |
| Traffic Lights, Stepper Motor, Numerical Printer, RTC, LCD, etc. | ||
| Driver Software for communication with PC Compatible Systems | ||
| including RS 232C Cable. | ||
| Ni-Cd cells for power backup to RAM. | ||
| INTERFACE | : | Parallel I/O: 40 lines (24 of8255 and 16 of PIO brought out to two 26 |
| SIGNALS | pin ribbon cable connectors | |
| Serial I/O: RS 232 C with standard MODEM control signals are brought | ||
| out through on-board 9 Pin D-type female connector. | ||
| Cassette Interface: Cassette Interface: Audiotape interface signals | ||
| provided via. Two audio jacks. | ||
| Interrupts: NMI is used by the system for implementing the Single | ||
| Step facility INT is available to the user. | ||
| POWER SUPPLY | : | +5v @ 770mA in keyboard |
| REQUIRMENT | +5v @ 640ma in serial | |
| + 12v @ 25mA in Serial | ||
| Dimensions | : | with ABS Plastic molded cabinet (L) 365 mm x (H) 55mm |
| Weight | : | 1300gms Approximately |
| Options Available | |
 |
+5V Power Adapter. |
|
50 core ribbon connector set |
|
Centronics printer interface cable |
|
Power supply (5v @ 3a, + 12V @ 250mA, 30V \@ 100mA) |
|
68020/68881 upgrades: A plug in replacement for 68000 processor, which allows all |
| the advanced features of the 68020 and 68681. | |
|
Interface Modules: Keyboard, Elevator, Display, ADC using DAC, Dual Slope ADC, |
| Dual DAC, Logic Controller, Traffic Lights, RTC, 18 Column Numeric Printer etc. | |
